Install peel-and-stick wall tiles on a smooth, clean, dry and firmly attached surface. Follow the six steps below, or explore a backing-board method for uneven existing tiles.
Six simple steps
Tap a step to enlarge and read the instructions.
Each sheet has two rows of vertical tiles. Keep the middle grout line aligned from one sheet to the next.
You’ll need: a level, pencil, tape measure, compatible cleaner, cloth, cutting mat and recommended cutting tool. Switch off power and verify it is off before working around outlets.
Which surfaces can you stick to?
Morry’s surface check Smooth, clean, dry and firmly attached? You’re ready to check adhesive compatibility. Loose paint or dust? Prepare the wall first.
✓ Suitable for direct application*
Smooth painted wallSmooth ceramic tileSmooth acrylic panelGlass or mirror
Smooth, clean, dry and firmly attached. Paint must be fully cured.
× Do not stick directly
Textured wallRaised-pattern tilePeeling or powdery wallRough brick or concrete
Prepare the wall, then use a suitable flat backing board.
*Check compatibility with your tile adhesive and test a hidden area first.
Uneven wall?
Follow the backing-board method below.
Peeling or powdery wall?
Remove loose material, repair and seal it first. Never attach tape to a crumbling surface.
Use a flat backing board over uneven, firmly attached tiles. Repair peeling, powdery or damp walls before you begin.
White foam PVC board
Choose a smooth, rigid sheet and cut it to fit. 3 mm thick, 24 × 36 in (61 × 91 cm) is one size option.
Use foam PVC, not paper-faced craft foam. Support larger panels securely.
Clear construction adhesive
Choose an adhesive suitable for PVC and your wall surface. The pictured Gorilla Clear is one option to check.
For a tape barrier, check compatibility with the tape too. Allow the specified curing time.
Also prepare
Tape measure, pencil, straightedge, cutting knife, cutting mat and an adhesive applicator.
A tape barrier must support the full panel weight. Ordinary decorating tape is not a mounting system.
Peeling or powdery wall?
Remove loose material and repair the wall first. A backing board needs a firm, stable surface.
How to install tiles using a backing board
Follow these four steps: cut the board, apply the tiles, prepare the fixing, then mount the finished panel.
Measure & cut
Measure your backsplash. Cut the board and dry-fit it, including any outlet openings.
Tile the board
Lay the panel flat. Apply the sheets and align both rows and the grout lines.
Tape, then adhesive
For a compatible tape-barrier system, apply the tape to the prepared tiles, then apply construction adhesive as specified by the fixing manufacturer.
Mount the panel
Position the finished panel. Follow the fixing instructions for pressure, support and curing time.
Peel-and-stick tile installation FAQs
Can I reposition a tile if I make a mistake?
Yes. Gently lift and reposition the sheet while you are installing it. Peel slowly from one corner, realign the grout lines, then press firmly once the position is right. Allow about 48 hours after pressing for the adhesive to form a lasting bond; make adjustments as soon as possible rather than waiting. Gentle repositioning on a sound, fully cured wall should leave the surface intact, but loose or uncured paint can lift.
How long should I wait after painting my wall?
Wait at least 21 days after painting before installing peel-and-stick tiles. Paint that feels dry may still be curing underneath. In cool or humid rooms, or after thick coats, allow around 30 days or longer. Before you start, make sure the paint is firm, fully dry and well bonded, then test a tile in an inconspicuous area.
How do I cut tiles around outlets and corners?
Switch off the circuit and verify that the power is off before working around outlets. Measure carefully, make a paper template if needed, and cut the tile on a cutting mat before fitting it. At corners, cut and apply each side separately, keeping the grout lines aligned. If added thickness affects the outlet or cover, ask a qualified electrician to adjust it.
Can I use these tiles behind a stove or in a bathroom?
Yes—MORCART peel-and-stick wall tiles are suitable for kitchen and bathroom splashbacks on smooth, clean, dry surfaces. Keep them away from open flames, direct heat and areas constantly exposed to water, such as inside a shower. Leave the clearance required by your stove or appliance; heat-resistant does not mean fireproof. If you use a backing board, keep foam PVC out of direct-heat areas too.
What should I do if an edge starts lifting?
Check for grease, dust, moisture or an uneven spot beneath the edge. If the wall is dry and the adhesive is clean, press the edge firmly with a clean cloth, including the seams and corners. If it lifts again, fix the surface problem and replace the affected sheet. Avoid adding household glue: it can make later removal harder and damage the finish.
Can I remove the tiles later, and will they damage the wall?
Yes. Warm a small section with a hairdryer on a low setting, then gently lift a corner and peel slowly, keeping the sheet close to the wall. Continue warming as you go instead of pulling sharply. Removal is easiest on a smooth, sound, fully cured surface. Weak, peeling or uncured paint can come away, so test a hidden area first. Tiles installed over a board or removable vinyl will come away from that layer; removing the underlying layer is a separate step.
