Accordion
This content type will accept rich text to help with adding styles and links to additional pages or content. Use this to add supplementary information to help your buyers.
Cement Tiles Square - Light Blue
Mushroom Butler calculator
How many 10-packs do I need?
Measure the total backsplash width and height. The calculator adds a cutting buffer so you do not run short around corners, outlets, or end rows.
Recommended product quantity
Enter measurementsA 10-pack covers about 9.7-10 sq ft before trimming.
30-day returns
Free shipping over $39.99
Water-Resistant & Wipe-Clean
Prep, Peel, Press
Not sure if it fits your wall?
Ask the Mushroom Butler before you stick. Check your surface, heat, moisture, and removal risk before choosing a full kitchen makeover.
Care, Surface & Removal
How do I clean peel-and-stick backsplash tiles?
Wipe the surface with a soft cloth and mild cleaner. Avoid abrasive pads, harsh solvents, and long-term soaking around seams. For kitchen splashes, clean oil and water marks soon after use.
Which surfaces work best?
MORCART peel-and-stick tiles work best on smooth, clean, dry walls or existing flat tile. Textured, damp, freshly painted, loose, or unfinished surfaces should be tested first or avoided. If you rent, start with a sample before a full wall.
What should I do before I stick?
Measure your backsplash area, clean off dust and oil, let the wall dry completely, plan the layout around outlets and corners, then test one sheet first. Press edges and seams firmly during installation.
Can I remove them later?
Removal depends on wall condition, paint quality, installation time, and heat or moisture exposure. Warm an edge gently, peel slowly, and stop if paint begins to lift. For rentals, test a sample in a low-visibility area first.
Shipping & Returns
Shipping options
Delivery methods and estimates are shown at checkout. If this item is also available on Amazon or another marketplace, choose the route that works best for your address.
Order tracking
Tracking details are sent by email once your order ships. If you do not see an update after your shipment confirmation, check spam first, then contact us.
Need product help?
Not sure about surface, heat, moisture, or removal? Contact us before ordering, or use Ask the Mushroom Butler for a quick fit check.
MORCART Installation Guide
Six simple steps before you stick. Smooth, clean, dry surfaces work best; test first if you rent or have textured walls.
1. Clean the wall
Remove dust, oil, and moisture. Use a suitable degreaser for kitchen backsplashes, then let the surface dry completely.
2. Measure and level
Mark a straight guide line for the first row so the tiles line up under cabinets, outlets, and corners.
3. Dry fit first
Lay out the sheets before peeling. Check direction, pattern repeat, and where you will trim edges.
4. Peel, align, press
Peel part of the backing, align with your guide line, then press from the center outward to reduce bubbles.
5. Trim and finish edges
Use a sharp utility knife for outlets, corners, and end rows. Press edges and joints firmly.
6. Let it set
Avoid heavy moisture, cleaning, or heat exposure while the adhesive sets. For rentals or textured walls, test a sample first.